ISA96 V8/103

Front View of the ISA96 V8/103

ISA96 V8/103 (8HP-Version)

For many industrial CPU boards an extreme low heat production is more important than a very high clock rate. Only this way, fanless or even hermetically encapsulated systems can be realised.

The newly developed ISA96 V8/103 was specifically designed for such conditions. It allows to operate 500MHz class systems with less than 5W of power consumption, without leaving the narrow price frame of Low-Cost applications.

ISA96 M4/103

The equipment of this CPU board is attractive, unless its low price. In addition to its firmly soldered 512MB main memory, the ISA96 V8/103 features an integrated graphics controller, an Ethernet controller, a watchdog, a FlashDisc, drive connecions, and diverse interfaces for peripheral units.

Because CompactFlash modules may be used as mass storage, and thanks to the multiple possibilities for the connection of flat displays, it is ideally suited for Embedded applications. We also strived to longterm availibitity of the component.

The Technical Data in Short:
  • Processor AMD Geode™ LX 800@0.9W with the following features:
    • 32Bit Processor, clock frequency 500MHz, 64KB/128KB On-Chip L1/L2-Cache, x86 compatible Ultra-Low-Power architekture
    • North- and Southbridge, 400MHz DDR Memory-Controller
    • 2D Graphics controller, connection possibilites for flat displays, resolution up to 1600x1200
  • 512MByte firmly soldered mobile-DDR-SDRAM
  • Fast-Ethernet controller 100Base-TX/10Base-T with RJ45 receptacle on the front panel
  • Hardware-Monitor for surveillance of temperatures and supply voltages
  • AWARD/Phoenix-BIOS and VGA-BIOS in 1MByte Flash-EPROM
  • BIOS boots from hard disk drive, Flash and USB
  • Copy of BIOS-Setup in the EEPROM
  • On-Board CompactFlash socket and On-Board 512MB Flash-Disk at the IDE interface
  • 44pol. 2mm-header for 2,5" hard disk drive also at the IDE interface
  • 1MByte battery-buffered SRAM-Disc
  • One AT-compatible serial interface with 16 Byte FIFO (hard-wired as RS232C interface)
  • One USB-2.0 interface on the front panel
  • Connections for keyboard and PS/2 mouse via Mini-DIN receptacle on the front panel (via Y cable)
  • Watchdog, can be disabled, trigger period can be set between 0.25s and 32s
  • connector for internal keyboard, mouse, USB, speaker on header row or Rear-I/O adapter
  • LED displays on the front panel: "Run", "DD" and "GP", and 2 LEDs for Ethernet
  • 3U board with front panel 4HP,
    Dimensions of the board 100mm x 160mm x 20.3mm
  • Operating temperature 5-55°C, relative humidity 10-90% non condensing
  • Required supply voltages: +5V (typ. 1,0A)
Additional Features in the 8HP-Version:
  • parallel interface (ECP, EPP, PS/2, SPP) on the front panel
  • Header for an additional serial- and USB-interface as exchangeable driver module on the front panel (RS232C+USB or RS485/422 Opto+USB or threefold USB-Hub)
  • Optional On-Board 2.5" hard disk drive at the IDE interface
  • 3U board with front panel 8HP,
    Dimensions of the board 100mm x 160mm x 40.6mm
ISA96- oder AT96 Bus (configurable by Jumper)

Order Numbers:
434.268400.000 2  ISA96 V8/103 with AMD Geode LX800, 512MB, 4HP
434.268401.000 0  ISA96 V8/103 with AMD Geode LX800, 512MB, 8HP
434.268402.000 8  ISA96 V8/103 with AMD Geode LX800, 512MB, 2,5"-HD, 8HP
434.268410.000 8  AT96 V8/103 with AMD Geode LX800, 512MB, 4HP
434.268411.000 6  AT96 V8/103 with AMD Geode LX800, 512MB, 8HP
434.268412.000 4  AT96 V8/103 with AMD Geode LX800, 512MB, 2,5"-HD, 8HP

Order Numbers for Accessories:
404.268660.000 0  Serial-Module M4 RS232C, 1xUSB
404.268661.000 8  Serial-Module M4 RS485/422 Opto, 1xUSB
404.268662.000 6  Serial-Module M4 USB-Hub 3
Janich & Klass · Computertechnik GmbH · Zum Alten Zollhaus 24 · D-42281 Wuppertal