Logo
ITS-1

ITS-1 Open Frame 7" with resistive Touchscreen




The ITS-1 is a modular ARM Cortex-A8 industrial computer with touch display. In the open frame version, the ITS-1 can be integrated in a client-specific housing. The version with front panel and housing is foreseen for installation in enclosure doors. In both versions, all connections are made from the rear side from below.

In the open frame version of the ITS-1, display and main board are mounted on a solid plate from stainless steel. The rear side is protected by a cover from stainless steel.

In case of the enclosed version, the front side can be designed as per customers’ demands. At choice are, besides front panels from stainless steel or powder coated steel, also aluminum front panels with membrane keyboard and touch pad. Client-specific designs are possible, even for small quantities.

its1_l

In both versions, only high-quality TFT displays are installed with sizes between 7" and 15". Their backlight is realized using long-life LED technique. Touch sensors are available either as resistive or capacitive versions.

The system can be expanded by additional interfaces, via a system connector on the main board. An expansion board can be inserted here, to put available two opto-decoupled RS422/485 interfaces, for example, or a DC/DC converter for galvanically separated power supply.

its1_b Technical Data in Short:
  • Open frame version on mounting plate with rear-side cover from stainless steel, to be mounted in client-specific housings
  • Alternatively available:
    • Version in stainless steel housing with front panel for installation in enclosure doors
    • Front panel from stainless steel, powder coated steel, or aluminum, protection class IP65
    • Membrane keyboard, LEDs, touch pad, and design as per customers‘ demand
  • Main board with Sitara ARM Cortex-A8 32Bit RISC processor AM3359 from Texas Instruments, clock frequency 1GHz
  • 512MB DDR3-SDRAM, clock frequency 400MHz
  • 512MB NAND-Flash (optionally up to 2GB) and 16MB SPI-Flash
  • LCD controller for displays with up to 2048 x 2048 pixels
  • SGX530 3D Graphics Engine with support for Direct3D Mobile, OGL-ES 1.1/2.0, OpenVG 1.0 and OpenMax
  • TFT-Display 7"...15" with LED backlight, can be dimmed
  • Touch sensor, resistive or capacitive (PCAP)
  • Gigabit-Ethernet controller with RJ45 receptacle on the connector side
  • Two USB 2.0 Host interfaces with up to 480MB/s, one of them on the connector side
  • Serial interface COM1 as RS232 (Rx, Tx, RTS, CTS), Combicon connector
  • CAN interface, galvanically separated, Combicon connector on the connector side
  • On-Board MMC/SD socket, memory module can be exchanged from outside
  • System connector for expansion boards
  • External connections are connected on the rear side, from below
  • Wide range input 10,8 … 26,4VDC, power supply can be connected via Combicon connector
  • Operating temperature 5 … 55 °C
  • relative humidity 10-90% non-condensing
  • Approvals: CE (UL, ATEX, and Germanischer Lloyd (DNV GL SE) as an option)
  • Operating system Linux, Android or Windows Embedded Compact
Janich & Klass · Computertechnik GmbH · Zum Alten Zollhaus 24 · D-42281 Wuppertal